S600 Super Duty Rubbing Compound Medium Cutting Compound Removes Moderate Oxidation and Scratches for Car

S600 Super Duty Rubbing Compound Medium Cutting Compound Removes Moderate Oxidation and Scratches for Car

Instructions for use:

1.Wash the car to be polished (partial polishing, you can only clean the area that needs polishing).

2.If you want to remove deep scratches, first use 2000# sandpaper for sanding. When you finish sanding the sandpaper, you should clean the dust from the sandpaper with water or a wet towel. Do not let the dust remain on the paint surface.

3.Spread the wax evenly with a sponge on the paint surface that needs to be waxed (if the whole car is waxed, it should be done locally. It is absolutely not allowed to first apply the whole car before waxing, because the inside of the wax is operated like this The solvent will volatilize, and there will be a lot of dust when waxing, and it will also cause the phenomenon of burning paint).

4.Use a polishing machine with a spherical medium sponge disc (ordinary flat sponges are also available, and woolen balls or rabbit hair balls can also be used for construction. The surface of the sponge balls must be clean, and no other waxes or other substances can stick to it. On it).

5.Run the polisher at low speed for 600 rpm and push the wax away completely, and the speed will increase to 1400 rpm.

6.Until all the wax is collected, the brightness is completely improved, and the scratches are removed before the next partial area construction can be carried out.

7.After the construction of the whole vehicle by analogy is completed, it is recommended to clean it. If you need to do mirror reduction, glaze sealing, coating, etc., you must use car wash liquid to clean the residual wax and grease on the surface before proceeding to the next stage of construction.